Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Service warning light

To manually reset the service light on your first-generation Citroen C3, you only need a few seconds. First, get inside the car and ensure the ignition is off and the handbrake is engaged. Then, locate the button on the right side of the dashboard. Press and hold this button while turning on the ignition. Wait for the ten-second countdown on the display, then release the button to complete the reset procedure.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Citroen C3 2010
How to Reset the Service Light of the Citroen C3 2010
Citroen C3 (2009-2016 / SC) Manually resetting the service light on your 2010 Citroen C3 is very straightforward; just follow the steps in the following guide to complete the op…
How to Reset the Service Light in the Citroen C3?
How to Reset the Service Light in the Citroen C3?
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to reset the service light in the Citroen C3. Before proceeding, ensure you have completed all the tasks required …
How to Reset the Service Light on a Citroen C3 2
How to Reset the Service Light on a Citroen C3 2
Citroen C3 (2009-2016 / SC) The attached video tutorial not only shows how to reset the service light and related message but also how to carry out the operational part, namely …

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos