Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Cabin Air Filter

Model: Citroen Xantia MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Cabin air filter

Video tutorial

This guide explains how to replace the cabin air filter in your car. It is a procedure that should be done periodically and is essential for the health of the driver and passengers. With a bit of skill and patience, you can do it yourself, saving some money in the process.

Quality filters at reasonable prices can be found in accessory shops. The filter is located on the passenger side, under the glove compartment.

To access it, you will need to move the relevant panel, which will need to be unlatched from its position. Carefully pull it out and lower it gently.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Citroen Xantia (1993-2002 / MK 1) The cabin air filter is located on the passenger side, just below the glove compartment, above the scuff plate. To access the air duct, first remove …
What is the fuse diagram for the Citroen Xantia?
Citroen Xantia (1993-2002 / MK 1) If one of the devices in your Citroen Xantia has suddenly stopped working, the first thing you can do is check the status of the respective fuses who…
Replacing the Hydraulic Suspension Spheres
Replacing the Hydraulic Suspension Spheres
Citroen Xantia (1993-2002 / MK 1) The hydraulic spheres that control the vehicle's suspension system are located under the scuttle and in the engine bay. A special tool is required fo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos