Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses in a Citroën Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Inside the Citroën Jumper, all fuses are contained within the dedicated fuse box installed in the vehicle: this is located inside the cabin. To locate it, you will need to detach the panel of the small upper glove compartment on the passenger side.

By removing the panel, you will be able to identify all the fuses in the box below: here you can find the fuse for the dipped headlights, the cabin fan, the horn, etc. Each fuse can be replaced with a new one of the same amperage.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) In the Citroën Jumper, all fuses are located within dedicated fuse boxes inside the vehicle: there are four in this type of vehicle. The first two ar…
Where to Find the Fuses for the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses for the Citroën Jumper are located within the designated fuse boxes found in the vehicle: this model has four. The first two are located be…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos