Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Service Light on a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Service warning light

If the SERVICE light illuminates on the instrument cluster display, it means it's time for maintenance; once you have changed the oil and the relevant filter, resetting the SERVICE warning light is done manually without the aid of any diagnostic tool;
- switch off the engine;
- press and hold the button located just below the speedometer in the bottom right;
- while holding this button, turn on the ignition without starting the engine;
- keep the button pressed until the countdown is complete;
- switch off the ignition.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the economy mode of the Citroen C3
How to deactivate the economy mode of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this short guide, we will see how the active energy saving mode of the Citroen C3 (but also on most models of the manufacturer) works, by deactiva…
How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How do you reset the Service light on the Citroën C3?
How do you reset the Service light on the Citroën C3?
Citroen C3 (2009-2016 / SC) The Service indicator that is shown on the instrument panel of the Citroën C3 can be reset completely by holding down the button located at the botto…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos