Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Time on the Citroen Berlingo MK1

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Clock

In this video, we will see how to set the correct time on the dashboard clock if the Citroen Berlingo MK1 experiences a power interruption for a long time, or during the change from standard time to daylight saving time. Sit in the driver's seat, turn the ignition key to the 'on' position, press and hold the button located between the rev counter and the fuel gauge for three seconds, you will see the time indication start to flash and advance, let it run until you reach the desired figure and release the button. Wait a few seconds and repeat the same procedure to update the minutes.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the time on the Citroen Berlingo?
How do you adjust the time on the Citroen Berlingo?
Citroen Berlingo (2018-2026 / MK 3) With the many parameters that can be consulted and set, even for the Citroen Berlingo there is the possibility to set the clock, for example for the …
How to change the time on the onboard computer of a Citroen Berlingo?
How to change the time on the onboard computer of a Citroen Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To change the time on the onboard computer of a Citroen Berlingo, turn on the instrument panel and focus on the display of the central onboard comput…
How to set the time on the instrument panel of the Citroen Berlingo
How to set the time on the instrument panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below we will see the instructions on how to adjust the time on the display of the instrument panel of the Citroen Berlingo, but also of the Peugeot …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos