Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the ECU of the Citroën C5?

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Warning light – error code

To reset the ECU of the Citroën C5, completely remove the unit from its housing so that it can be connected via the appropriate wiring to a computer: once the ECU is connected, use the program shown in the tutorial to select the corresponding car model and version. When the correct settings have been entered, you can reset all stored errors in the ECU by refitting and reconnecting the device inside its housing.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Energy Saving Mode on a Citroen C5
How to Disable the Energy Saving Mode on a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) The main instructions in this guide will show you how to disable the energy saving mode on a Citroen C5. First, get in the vehicle and connect your d…
Where is the fuse box of the Citroen C5 located?
Where is the fuse box of the Citroen C5 located?
Citroen C5 (2008-2017 / MK 2, RD, X7) All Citroen C5 vehicles produced from 2009 to 2015 have two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind th…
How to reset the service light on the Citroen C5
How to reset the service light on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Today we will explain how to manually reset the service light, related to the car's maintenance, of the Citroen C5 model x7 from 2008-2017. To reset …

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos