Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Citroen C4 Grand Picasso?

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the tyre warning light on the Citroen C4 Grand Picasso, a very simple and quick operation. Before doing this, ensure you have restored the correct pressure in each tyre according to the instructions in the manual.

First, enter the cabin, then turn on the instrument panel and press the button depicting a vehicle located to the right of the display. Next, move to the left screen, enter "Under-inflation initialisation" and confirm the reset.

To verify that the operation was successful, restart the vehicle.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Restore Factory Settings on a Citroen C4 Grand Picasso
How to Restore Factory Settings on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Below are the instructions that will allow us to restore the factory settings of the Citroen C4 Grand Picasso. First, get into the vehicle and start …
How to open the fuel flap on a Citroën C4 Grand Picasso?
How to open the fuel flap on a Citroën C4 Grand Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) To open the fuel flap on a Citroën C4 Grand Picasso, open the driver's door to access the lower left part of the dashboard near the steering wheel. H…
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos