Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Airbag

This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle and remove the two screws with a Torx screwdriver located behind the steering wheel to detach and remove the airbag. Next, disconnect the electrical connector found at the back, as shown in the video. At this point, disconnect the switch and, if necessary, the control button panel; apply the reverse procedure for reassembly!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …
Removing the Third Brake Light on Citroen C4 Grand Picasso 2010
Removing the Third Brake Light on Citroen C4 Grand Picasso 2010
Citroen C4 Picasso (2006-2013 / MK 1) In today's video, we will go through the steps to remove the rear third brake light on a 2010 Citroen C4 Grand Picasso. First, open the boot lid and …
How to Replace the Stop Switch on the Citroen C4 Grand Picasso MK3
Citroen C4 Picasso (2013-2022 / MK 2) This brief guide will show you how to remove and replace the stop switch on the Citroen C4 Grand Picasso third series, following these simple steps. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos