Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the interior door handle of the Citroen C5

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Handle

Today we will see the instructions that will allow us to disassemble and replace the internal handle of the front door of the Citroen C5. First, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws; then we disconnect the electrical connector found on the back, also disconnecting the handle cable, as shown in the video. At this point, we unscrew the fixing screws of the opening handle, in order to remove it and replace it with the new one; finally, we reassemble the door panel!

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Handle of a Citroen C5
How to Remove the Door Handle of a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Removing the internal opening handle of a Citroen C5 model produced from 2008 to 2017 is a very simple operation, achievable with quick and easy step…
How to disassemble the internal roof lining of the Citroen C5
How to disassemble the internal roof lining of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Today we will see the instructions on how to disassemble and replace the headliner or the internal roof lining of the Citroen C5. First, we get on bo…
How to Remove the Door Panel on the Citroen C5?
How to Remove the Door Panel on the Citroen C5?
Citroen C5 (2008-2017 / MK 2, RD, X7) Removing the door panel of the Citroen C5, as shown in this tutorial, is an extremely simple and quick operation. First, open the door in question, t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos