Do it yourself
Frequently asked questions about cars and motorcycles

How to perform an oil change on the C3

Model: Citroen C3 SC - Years 2009-2016
Part: Checks and maintenance

In this video, we see how to reset the oil warning light on the Citroen C3 2nd series. It is recommended to perform this procedure only after changing the oil. To reset, first press and hold the reset button on the instrument panel, while holding it down start the instrument panel, now on the right side of the panel a countdown will appear, wait for the countdown to finish and then release the button and restart the instrument panel. At this point, the reset procedure is complete and the warning light will no longer be present on the panel.

Posted on 26 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) The video shows how to change the engine oil in a Citroen C3. Follow the steps to perform this DIY maintenance independently. First, gather all neces…
Citroen C3 (2002-2009 / FC, FN) Perform the oil change at the mileage specified by the manufacturer. Lift the engine compartment release lever located at the bottom left of the dash…
Citroen C3 (2003-2010 / Pluriel) The engine oil replacement must be performed when the oil warning light activates on the instrument panel display along with the maintenance light. T…

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos