Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the spark plugs of the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Spark plugs
Operation: How to replace the spark plugs of the Citroen C3

Unclip and lift the hood, then you will have to disconnect the pins indicated in the video, identify the spark plugs in question, they are located behind the upper engine cover, then after disconnecting all the various connectors proceed to remove the bolts that block the group of coils above the spark plugs, now remove it and insert a socket wrench in each hole to be able to obviously remove each spark plug, then repeat the operation with each spark plug in each hole, now install the new spark plugs and retrace the steps backwards to reassemble the various instruments.


Posted on 25 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - How many km change the spark plugs of the Citroen C3 1.1? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos