Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Citroën Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

Video tutorial

Lift the wiper arm. Rotate the blade so it is perpendicular to the arm. Push the blade to detach it from the arm. Insert the new blade into the metal cylinder of the arm. Rotate the blade until it clicks into place. Gently lower the wiper back onto the windscreen.

Raise the rear wiper arm. Rotate the blade 45°. Push the blade with your thumbs to release it. Position the blade so that its small support bar is in front of the designated hole in the arm. Press towards you to reattach the blade. You will hear a small 'click' when it locks into place.

Lower everything back onto the windscreen.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How do you replace the radiator of the Citroën Xsara Picasso?
How do you replace the radiator of the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In order to replace the radiator of the Citroën Xsara Picasso, you will need to open the hood so that you can identify the components inside the engi…
Replacing the Starter Motor on the Citroen Xsara Picasso 2.0 HDi
Replacing the Starter Motor on the Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the main steps on how to remove and replace the starter motor on the Citroen Xsara Picasso 2.0 HDi. First, open the bonnet of the vehicle a…
How to replace the starter motor of the Citroen Xsara Picasso 1.6 16V
How to replace the starter motor of the Citroen Xsara Picasso 1.6 16V
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide we will see the main instructions that will allow us to disassemble and replace the starter motor of the Citroen Xsara Picasso 1.6 16V.…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos