Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Fog Light Bulbs on C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Fog lights

If you need to replace the fog light bulbs (H11 fitting), it is advisable to choose LED types. To perform this maintenance, first remove the plastic cover around the fog light by prying along the edges. Next, unscrew the fixing screws of the fog light (Torx 20) to remove it from its housing. Disconnect the bulb's power connector and twist to remove the bulb. Then, install the new bulb, reconnect the power connector, tidy the cables with a plastic tie, and proceed with reassembly in reverse order.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Headlight Bulbs on Citroen C4 Picasso
How to Remove Headlight Bulbs on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Are the front headlight bulbs on your Citroen C4 Picasso blown and need replacing? Here’s how to change them. Open the front bonnet by pulling the le…
How to remove the rear fog lights in the Citroen C4 Picasso?
How to remove the rear fog lights in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial we can see how to disassemble the rear fog lights in the Citroen C4 Picasso, an extremely simple and quick operation. First of all, …
How do you replace a light bulb in the Citroen C4 Picasso?
How do you replace a light bulb in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) It is important to keep all the bulbs of the headlights, both front and rear, of your car efficient. Let's go into detail about the Citroen C4 Picass…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos