Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Accessory Belt on a Citroen C3 Diesel

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: V-belt

See other generations:
Video tutorial

In this video, you can see how to replace the service belt on a Citroen C3 diesel; open the bonnet and lift the front of the vehicle. You will need to remove the wheel from the passenger side, as well as the wheel arch liner, to comfortably access the belt.

Lift the tensioner pulley and remove the belt. When changing the belt, you must also replace the tensioner pulley, which is secured by two 10 mm bolts.

Replace the pulley and then fit the new belt in the original arrangement around the various components, ensuring the correct direction of rotation. Now you can refit the wheel arch liner, then the wheel, and lower the vehicle.

Operation complete.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
Citroen C3 (2002-2009 / FC, FN) This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Citroen C3 (2016-2023 / SY, SX) Today we will look at the useful instructions for removing and replacing the timing belt on the Citroen C3 1.2 Puretech; the timing belt replacement …
How to Replace the Timing Belt on the Citroen C3
How to Replace the Timing Belt on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to replace the timing belt on the Citroen C3. First, position the car on a lift to raise the vehicle and work co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos