Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Timing belt

Today we will look at the useful instructions for removing and replacing the timing belt on the Citroen C3 1.2 Puretech; the timing belt replacement should be included within a timeframe of 5-6 years or 100,000 miles, although a visual check is advisable before these times if there are signs of wear. To access the timing belt, which in this case is oil-bathed, it is necessary to remove the cylinder head cover and the crankshaft pulley, disconnecting the V-belt; loosen the tensioner to replace the timing belt.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, follow the main steps to remove and replace the oil-bath timing belt of the Puretech three-cylinder engine in the Citroen C3. First, raise the…
How to save the oil-bath timing belt of the Puretech 1.2 engine
How to save the oil-bath timing belt of the Puretech 1.2 engine
Citroen C3 (2016-2023 / SY, SX) The Puretech engine from 2017 in the Citroen C3 in the video (and not only in this model) has a weak point: the oil-bath timing belt which, after onl…
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
Citroen C3 (2002-2009 / FC, FN) This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos