Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Headlight bulb

These simple steps will allow us to disassemble and replace the headlight bulb of the Citroen C3. First, open the hood and remove the plastic bulb protection cap, which can be found behind the headlight. To remove the left headlight cap, it will be necessary to remove the air intake hose, as shown in the video. Next, disconnect the electrical connector of the bulb, unhook the metal clip to remove it and replace it with the new one (with the same fitting). Reassemble the bulb and check its operation, finally securing the cap!

Posted on 4 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Citroën C3?
How to Replace the Front Headlight Bulb on a Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the front headlight bulb on a Citroën C3, open the bonnet to access the inside of the headlight. Once you have access, detach the headligh…
Replacing Front Headlight Bulb on Citroen C3
Replacing Front Headlight Bulb on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replace the blown bulbs in the front headlight of a Citroen C3. Open the front bonnet and secure it. Remove the plastic cover to access the front hea…
How to Replace the Headlight Bulb on a Citroen C3
How to Replace the Headlight Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you begin, open the bonnet of your Citroen C3. Start by unfastening the clip that secures the rear cover of the headlight bulb, then remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos