Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Citroen C4 Picasso MK2

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Tail light bulb

If one of the rear lights of the Citroen C4 Picasso were to burn out, change it as soon as possible to ensure safe driving. To replace it, open the rear hatch, unscrew the torx 30 screw at the top of the hatch, open the panel corresponding to the light, disconnect and separate the connector, unscrew the two screws holding the light, lower the hatch, use a plastic lever to remove the light and remove it. Place it on a work surface, replace the burned-out bulb and reassemble the light, following the steps in reverse.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs in the Citroen C4 Picasso?
How to replace the rear headlight bulbs in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial we can see how to replace the rear headlight bulbs in the Citroen C4 Picasso, a very simple and quick operation. First of all, make …
Where are the fuses located in the Citroën C4 Picasso?
Where are the fuses located in the Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) The fuses in the Citroën C4 Picasso are contained within specific fuse boxes installed in the car: the first is located inside the cabin, in the lowe…
Replacing the Rear Brake Pads on a Citroen C4 Picasso
Replacing the Rear Brake Pads on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the rear brake pads on a Citroen C4 Picasso? Here’s how to do it. Lift the car on a column lift to the desired height, then remove the whee…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos