Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara
  6. : Outside rearview mirror

Citroen Xsara - Outside rearview mirror

Citroen Xsara (1997-2006 / MK 1)
How do you replace the mirror motor of the Citroën Xsara?

In order to replace the side mirror motor of the Citroën Xsara, you need to loosen the screws that hold the piece from the inside: these screws are located …read all…
Posted on 24 November 2023 by ScegliAuto

Airbags (3) Alternator (2) Car stereo (2) Air Vents (1) Spark plugs (2) Key (4) Timing belt (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (3) Bearing (1) Headlight (1) Cabin air filter (3) Clutch (1) Interior lights ceiling light bulb (1) Dashboard light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Door panel (1) Fuel pump (2) Window lift button (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (11) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos