Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Cabin air filter

Citroen Xsara - Cabin air filter

Citroen Xsara (1997-2006 / MK 1)
How to change the cabin filter on a Citroen Xara Picasso.
In the Citroen Xara, the pollen filter is located in the engine compartment, so you will need to open it and you will see it at the top left of the engine …read all…
Posted on 4 April 2023 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side, immediately under the glove compartment: then remove the sound-absorbing lining to reach …read all…
Posted on 27 August 2023 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Passenger compartment filter replacement guide
The passenger compartment air filter must be checked, cleaned and possibly replaced at regular intervals in order to have the best possible air quality. The …read all…
Posted on 23 June 2023 by ScegliAuto
Airbags (3) Alternator (2) Car stereo (2) Air Vents (1) Spark plugs (2) Key (4) Timing belt (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (3) Bearing (1) Headlight (1) Cabin air filter (3) Clutch (1) Interior lights ceiling light bulb (1) Dashboard light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Door panel (1) Fuel pump (2) Window lift button (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (11) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos