Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Timing belt

Citroen Xsara - Timing belt

Timing Belt Citroen Xsara (1997-2006 / mk 1)

Citroen Xsara (1997-2006 / MK 1)
How to Remove the Timing Belt on a Citroen Xsara
Here's how to remove and replace the timing belt on a Citroen Xsara. Lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to …Read all…
Posted on 20 March 2026 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Timing Belt Replacement
It is advised to undertake this maintenance only if you have good general mechanical knowledge, as a simple mistake in positioning the timing belt could …Read all…
Posted on 21 February 2026 by ScegliAuto
Airbag (3) Alternator (3) Car stereo (2) Air vents (1) Bushings (1) Spark plugs (2) Key (5) Timing belt (2) A/C controls (1) Onboard computer (1) Checks and maintenance (5) Bearing (1) Headlight (2) Cabin air filter (4) Clutch (2) Interior dome light bulb (1) Instrument panel light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Power steering fluid (1) Clock (2) Door trim panel (3) Fuel pump (3) Power window switch (1) Heater core (1) Wheel (1) Fuse box (16) Seat (1) Side mirror (1) Service warning light (2) Thermostat (1) Blower motor (1)

What Could Cause the Smart Instrument Cluster to Show Three Lines

When the instrument cluster of the Smart shows three lines, it indicates that there are issues with the gearbox and it cannot engage; otherwise, an "N" would appear. To diagnose the problem, you need to obtain an OBDII reader, which can easily be found on any e-commerce platform for a few pounds. The most common cause of failure is damaged wiring from the controller to the gearbox engine connector. These wires may touch the intercooler housing, leading to abrasions, possibly a frayed wire. The video also shows wires touching each other, which can create issues; there may be a damaged sensor, or the problem could be with the gearbox motor. Often, it is the moisture that damages the wiring.

Watch the video!


by ScegliAuto

More videos