Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Door trim panel

Citroen Xsara - Door trim panel

Door Trim Panel Citroen Xsara (1997-2006 / mk 1)

Citroen Xsara (1997-2006 / MK 1)
How to disassemble the inner panel of the door of the Citroen Xsara
The instructions in this guide will show us how to disassemble and remove the door panel of the Citroen Xsara. First, we open the car door and start unscrewing …Read all…
Posted on 2 October 2025 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Disassembly of the front door panel of the Citroen Xsara
The instructions in this guide will show us how to disassemble and replace the front door panel of the Citroen Xsara. First, we open the front door of the car …Read all…
Posted on 23 May 2024 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Removing the Door Panel on Citroen Xsara
Want to remove the door panel of your Citroen Xsara? Here’s how to proceed. Detach the trim around the opening lever, then remove the handle above the panel. …Read all…
Posted on 6 April 2026 by ScegliAuto
Airbag (3) Alternator (3) Car stereo (2) Air vents (1) Bushings (1) Spark plugs (2) Key (5) Timing belt (2) A/C controls (1) Onboard computer (1) Checks and maintenance (5) Bearing (1) Headlight (2) Cabin air filter (4) Clutch (2) Interior dome light bulb (1) Instrument panel light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Power steering fluid (1) Clock (2) Door trim panel (3) Fuel pump (3) Power window switch (1) Heater core (1) Wheel (1) Fuse box (16) Seat (1) Side mirror (1) Service warning light (2) Thermostat (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos