Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara
  6. : Interior blower

Citroen Xsara - Interior blower

Citroen Xsara (1997-2006 / MK 1)
How to remove the fan resistor on a Citroen Xsara

How to remove the fan resistor on a Citroen Xsara. Let's see in this video how to do the disassembly. Remove the plastic placed under the dashboard with a …read all…
Posted on 20 November 2023 by ScegliAuto

Airbags (3) Alternator (2) Car stereo (2) Air Vents (1) Spark plugs (2) Key (4) Timing belt (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (3) Bearing (1) Headlight (1) Cabin air filter (3) Clutch (1) Interior lights ceiling light bulb (1) Dashboard light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Door panel (1) Fuel pump (2) Window lift button (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (11) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos