Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fan resistor on a Citroen Xsara

Model: Citroen Xsara MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Blower motor

Video tutorial

How to remove the fan resistor on a Citroen Xsara. This guide shows you how to carry out the disassembly.

Remove the plastic panel under the dashboard using a lever (remove the securing screws of the cover), then unscrew the cover where the resistor is located with a screwdriver. Disconnect the large connector of the resistor, then remove it from the cabin.

Insert a new fan resistor (connect the power connector). Finally, reassemble the resistor cover and tighten the screws.

Check the correct assembly of the previously installed parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Where Are the Fuses in the Citroën Xsara?
Citroen Xsara (1997-2006 / MK 1) Inside the Citroën Xsara, the fuse boxes contain the fuses that control the operation of the devices present in the vehicle: there are two in this ty…
How to Replace the Cabin Fan Fuse of the Citroen Xsara
How to Replace the Cabin Fan Fuse of the Citroen Xsara
Citroen Xsara (1997-2006 / MK 1) The Citroen Xsara has two fuse boxes. The first fuse box is located inside the cabin, specifically in the left dashboard, driver's side. The second f…
Where are the fuses located in the Citroën Xsara?
Where are the fuses located in the Citroën Xsara?
Citroen Xsara (1997-2006 / MK 1) Any fuse in the Citroën Xsara is located inside one of the dedicated fuse boxes present in the vehicle: this type of vehicle has two fuse boxes. The …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos