Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : How to replace the fuse of the cabin fan in the Citroen Xsara.

Citroen Xsara - Video tutorial

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Fuse box
Operation: How to replace the fuse of the cabin fan in the Citroen Xsara.

The Citroen Xsara has two fuse boxes inside. The first fuse box is located inside the cabin, specifically on the left side of the dashboard, driver's side. The second fuse box is located in the engine compartment, specifically to the right of the battery. Today we will explain how to replace one of the fuses located inside the box, specifically the fuse for the cabin fan. The fuse is green in color and is number 40 with a rating of 46 amperes. To replace it, you need to remove the cover of the box and extract it using pliers, insert the new fuse, and close the cover.


Posted on 22 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xsara 1997-2006 - Fuse diagram of the Citroen Xsara? Read Answer
    • Xsara 1997-2006 - Where is the fuse box on the Citroen Xsara Picasso located? Read Answer
    • Xsara 1997-2006 - Where is the Citroà «n Xsara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos