Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Airbag

Citroen Xsara - Airbag

Airbag Citroen Xsara (1997-2006 / mk 1)

Citroen Xsara (1997-2006 / MK 1)
Repair of Steering Wheel Controls
If the buttons on the steering wheel that control the radio functions do not work, there is a problem either with the buttons or the electronic circuit that …Read all…
Posted on 23 February 2026 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Instructions for Removing the Driver's Airbag
Before proceeding with the removal of the driver's airbag container, disconnect the battery to cut power to the relevant control unit and prevent a false …Read all…
Posted on 21 February 2026 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Instructions for Removing Driver's Airbag
Before proceeding with the removal of the airbag, disconnect the battery to avoid triggering any warning lights. The airbag is secured to the steering wheel …Read all…
Posted on 11 February 2026 by ScegliAuto
Airbag (3) Alternator (3) Car stereo (2) Air vents (1) Bushings (1) Spark plugs (2) Key (5) Timing belt (2) A/C controls (1) Onboard computer (1) Checks and maintenance (5) Bearing (1) Headlight (2) Cabin air filter (4) Clutch (2) Interior dome light bulb (1) Instrument panel light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Power steering fluid (1) Clock (2) Door trim panel (3) Fuel pump (3) Power window switch (1) Heater core (1) Wheel (1) Fuse box (16) Seat (1) Side mirror (1) Service warning light (2) Thermostat (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos