Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Fuel pump

Citroen Xsara - Fuel pump

Citroen Xsara (1997-2006 / MK 1)
Testing and replacing the fuel pump on the Citroen Xsara
In this video tutorial we will see how to carry out the functional test and how to disassemble and replace the fuel pump on the Citroen Xsara, following these …read all…
Posted on 29 February 2024 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Disassembly and replacement of the petrol filter
In the event of a power failure to the engine, a problem could lie in the malfunction of the fuel pump. Before disassembling the pump remove the connector and …read all…
Posted on 13 July 2023 by ScegliAuto
Airbags (3) Alternator (2) Car stereo (2) Air Vents (1) Spark plugs (2) Key (4) Timing belt (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (3) Bearing (1) Headlight (1) Cabin air filter (3) Clutch (1) Interior lights ceiling light bulb (1) Dashboard light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Door panel (1) Fuel pump (2) Window lift button (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (11) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos