Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Alternator

Citroen Xsara - Alternator

Citroen Xsara (1997-2006 / MK 1)
How to remove the alternator on Citroen Xsara
Replacing the alternator on a Citroen Xsara Picasso, let's see the disassembly. We lift the bonnet putting it in safety, we identify the battery of the power …read all…
Posted on 10 December 2023 by ScegliAuto
Citroen Xsara (1997-2006 / MK 1)
Remove the alternator on Citroen Xsara
Does our car's alternator stop charging? How do you do it now? We pull the bar located at the bottom left of the dashboard and lift the bonnet putting it in …read all…
Posted on 28 November 2023 by ScegliAuto
Airbags (3) Alternator (2) Car stereo (2) Air Vents (1) Spark plugs (2) Key (4) Timing belt (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (3) Bearing (1) Headlight (1) Cabin air filter (3) Clutch (1) Interior lights ceiling light bulb (1) Dashboard light (1) License plate light (1) Handle (2) Engine (9) Starter motor (1) Door panel (1) Fuel pump (2) Window lift button (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (11) Outside rearview mirror (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos