Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the remote control for the Cupra Formentor

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Key

In today's article, we will show you how to replace the battery of the Cupra Formentor remote control. For this procedure, you will need a small flathead screwdriver. First, you need to remove the emergency key using the designated button. Once the emergency key is removed, use it to lever in the hole located below the cover where the Cupra logo is present, lift it up and remove it with your fingers. Once the cover is removed, use the flathead screwdriver to remove the battery. Now, replace the battery by pressing it in, reinsert the cover by pressing it with your fingers, and then reinsert the emergency key into the designated slot.

Posted on 4 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery in the Cupra Formentor?
How to replace the remote control battery in the Cupra Formentor?
Cupra Formentor In this tutorial, you can see how to replace the battery in the remote control of the Cupra Formentor, a very simple and quick operation. To do this,…
How to Change the Key Remote Battery on a Cupra Formentor
How to Change the Key Remote Battery on a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) To replace the battery in the key remote for a Cupra Formentor, press the unlock button to extract the emergency mechanical key from the remote. Then…
How to change the remote battery of the Cupra Formentor
How to change the remote battery of the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this article, you will learn how to replace the battery of the Cupra Formentor remote. For this operation, you will need a flat screwdriver. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos