Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Cupra Ateca?

Model: Cupra Ateca MK 1 - Years 2022-2026
Part: Fuse box

In this video, we can see where the fuse boxes are located in the Cupra Ateca and their respective diagrams, useful in case we need to check the fuses of a malfunctioning device. The first box is located inside the cabin, behind the small door at the lower left of the dashboard, on the driver's side. The second box is positioned in the engine compartment, protected by the black plastic cover next to the battery. Ensure to replace any blown fuses with replacements of equivalent specifications and operate with the vehicle turned off.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in a Cupra Ateca?
Where Are the Fuses in a Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) All the fuses in the Cupra Ateca are housed within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first …
What is the fuse layout of the Cupra Ateca?
What is the fuse layout of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In this video we can see where the fuse boxes of the Cupra Ateca are located and what their respective diagrams are, useful in case we need to check …
Where are the fuses of the Cupra Ateca located?
Where are the fuses of the Cupra Ateca located?
Cupra Ateca (2022-2026 / MK 1) All the fuses of the Cupra Ateca are divided into the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos