Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on the Dacia Logan

Model: Dacia Logan MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Shift knob

See other generations:
Video tutorial

Follow these instructions to remove and replace the gear knob on the Dacia Logan, as well as the Sandero. First, get inside the cabin and start by detaching and removing the gear gaiter from its base, prying it off from the sides; then, disconnect the clip found between the gaiter and the gear knob, as shown in the video.

At this point, pull the knob upwards to detach and remove it from the lever, replacing it with the new one; finally, refit the gaiter by placing a clip between it and the knob!


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to change the gear knob of the Dacia Logan.
How to change the gear knob of the Dacia Logan.
Dacia Logan (2004-2012 / MK 1) To change the gear knob of your first series Dacia Logan, you just need to follow the procedure described in this new guide. The entire operation tak…
How to replace the gear knob of the Dacia Logan
How to replace the gear knob of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) In the following guide, we will help you complete the replacement of the gear knob located inside the cabin of your Dacia Logan. First of all, make s…
How to Replace the Gear Knob on a Dacia Logan
How to Replace the Gear Knob on a Dacia Logan
Dacia Logan (2020-2026 / LJI) To remove the gear knob on a Dacia Logan with a manual transmission, park the vehicle, engage the handbrake, and put the gear lever in neutral. Relea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos