Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Duster
  6. : How to replace Dacia Duster fog light bulb

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Fog lights
Operation: How to replace Dacia Duster fog light bulb

Let's see in this video how to replace the bulb / led in the fog light on a Dacia Duster. We lift the car onto a column bridge and put it in safety. Let's get ready to remove the plastic coating (if present) in the lower part of the engine with a special socket wrench, we arrive at the side fog light placed in the bumper. After removing the lamp holder, we remove the damaged bulb and fit a new one (same size and voltage). We reassemble the plastic trim under the car bumper with attached pins. We test the correct functioning of the lights.


Posted on 12 October 2023 by ScegliAuto



How to replace the license plate light on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before we can start, we will have to get out of the cockpit of our Dacia Duster, and then head towards the tailgate. Let's start by going to disengag
How do you replace the headlight bulb on your Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Changing the bulb of the Dacia Duster is possible by opening the bonnet, so that the rear part of the corresponding headlight can be accessed. Here i
How to adjust the headlights of a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In order to adjust the angle of the headlight of a Dacia Duster, we will have to extract the led bulb from the headlight. So let's start by opening t

    Frequently Asked Questions

    • Duster 2017-2024 - I have the orange rear fog lamp on my Dacia Duster turned on despite the fact that the rear fog lamp does not come on, why? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos