Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Horn Fuse on a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

Replace the horn fuse located in the dedicated box on the Dacia Duster. Open the cover and check the instrument panel for any reported faults.

Use a plastic lever to remove the trim panel next to the steering wheel (left side). Then, use pliers to disconnect the damaged fuses located in the compartment.

Once this is done, insert the new fuses into the appropriate slots in the compartment. Finally, close the fuse inspection box with the cover and test the proper functioning of the vehicle by turning on the instrument panel with the appropriate key.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Dacia Duster (2010-2017 / MK 1, HS) Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia…
Dacia Duster (2017-2024 / HM, MK 2) In this video we can see how to repair the horn of a Dacia Duster: it is not working properly not because of a fuse, but because a poor quality black…
Dacia Duster (2017-2024 / HM, MK 2) In this tutorial, you will see how to replace the horn on the Dacia Duster, a very simple and quick operation. First, ensure that the key is not inse…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - What's the problem with the Dacia Duster's LPG? Read answer
    • Duster 2017-2024 - Where is the lpg filter located in the Daciaa Duster? Read answer
    • Duster 2010-2017 - Where is the inertia switch of the Dacia Duster located? Read answer
    • Duster 2017-2024 - What does the Dacia Duster "Anti-Pollution Control" label mean? Read answer
    • Duster 2017-2024 - Where is the horn of the Dacia Duster located? Read answer
    • Duster 2017-2024 - Where do i find the jack on a Dacia Duster? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos