Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse of the Dacia Dokker cigarette lighter socket

Model: Dacia Dokker MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuse box

Video tutorial

The fuse for the cigarette lighter socket on a Dacia Dokker vehicle is located inside the fuse box behind the driver's side glove compartment. To replace the fuse, we need to remove part of the left front dashboard and the driver's side glove compartment.

Using needle-nose pliers, we remove the 15-amp blue fuse number 35 for the cigarette lighter. We replace it with a 15-amp fuse and test its functionality before reassembling the fuse box cover and the left dashboard.

If the issue persists, it will be necessary to check the inside of the socket or the connector. If the connector is damaged, it will need to be replaced.


Posted on 30 May 2025 by ScegliAuto


Related tutorials

Location and diagram of the fuse boxes of the Dacia Dokker
Location and diagram of the fuse boxes of the Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) In this video, we can see the location and diagram of the fuse box of the Dacia Dokker: we find the only fuse box, located in the cabin, at the lower…
Where is the EOBD Socket on the Dacia Dokker?
Where is the EOBD Socket on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In this video, we can see where the EOBD (European On Board Diagnostic) socket is located on the Dacia Dokker. This socket is essential for accuratel…
How to reset the service light on a 2015 Dacia Dokker.
How to reset the service light on a 2015 Dacia Dokker.
Dacia Dokker (2013-2024 / MK 1) Today we will explain how to reset the service light on a 2015 Dacia Dokker. To perform the reset operation, turn on the instrument panel and press t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos