Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Spark plugs

Today we will explain how to replace the spark plugs of the Dacia Sandero model mk1. The first step to be performed is to open the front hood of the car. The second step to be performed is to grasp the end of the spark plug wire and pull upwards to extract it. The third step to be performed is to insert a 16mm extension key into the holes above the socket in order to remove the spark plug. The fourth step to be performed is to insert the new spark plug and tighten it with a torque wrench. The fifth step to be performed is to insert it into the spark plug wire. To avoid mixing up the positions of the spark plugs, we suggest replacing one spark plug at a time.

Posted on 24 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Spark Plugs on Dacia Sandero
Removing Spark Plugs on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Remove the damaged spark plugs from the engine of a Dacia. Start by pulling the lever to open the engine compartment and lift the front bonnet, secur…
How to change the spark plugs of the Dacia Sandero 1.4
How to change the spark plugs of the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today we will see the instructions that will allow us to disassemble and replace the spark plugs of the engine of the Dacia Sandero 1.4. First of all…
How to replace the air filter of the Dacia Sandero
How to replace the air filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is very likely that it is time to replace the appropriate air filte…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos