Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the spark plugs of the Dacia Sandero 1.4

Model: Dacia Sandero BS - Years 2008-2012
Part: Spark plugs

Today we will see the instructions that will allow us to disassemble and replace the spark plugs of the engine of the Dacia Sandero 1.4. First of all, we open the hood of the car and start removing the electrical connectors of the spark plugs; then we use a socket wrench with extension to remove the spark plugs, as shown in the video. At this point we install the new original spark plugs, of the right type and with the same thread; we screw them in by hand and then tighten them gently with a wrench, finally fixing the spark plug connectors. All that's left is to check the engine ignition!

Posted on 9 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Dacia Sandero
How to replace the spark plugs of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) Today we will explain how to replace the spark plugs of the Dacia Sandero model mk1. The first step to be performed is to open the front hood of the …
Removing Spark Plugs on Dacia Sandero
Removing Spark Plugs on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Remove the damaged spark plugs from the engine of a Dacia. Start by pulling the lever to open the engine compartment and lift the front bonnet, secur…
How to Change the Spark Plugs on a Dacia Sandero
How to Change the Spark Plugs on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Let’s see how to change the spark plugs on your Dacia Sandero: first, ensure the engine is cold; then disconnect the battery by removing the negative…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos