Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Dacia Logan - Sandero

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Side mirror

This brief guide will show us the steps that will allow us to disassemble and replace the external rearview mirror of the Dacia Logan, but also of the Sandero and Duster. First, we open the front door and start removing the triangular plastic cover located behind the mirror, thus accessing the internal screws; we use a socket wrench with extension to unscrew them, removing the mirror from the outside, as shown in the video. At this point, we install the new mirror, fixing it correctly and finally adjusting the glass!

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Glass of the External Rear-View Mirror on a Dacia Logan
Replacing the Glass of the External Rear-View Mirror on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Today's main instructions will show you how to remove and replace the glass of the external rear-view mirror on a Dacia Logan. First, move to the out…
How to Replace the Horn Lever on the Dacia Logan - Sandero
How to Replace the Horn Lever on the Dacia Logan - Sandero
Dacia Logan (2004-2012 / MK 1) .. lever on the Dacia Logan, as well as on the Sandero and Duster. First, get inside the vehicle and start removing the plastic cover around the steering.. …
How to change the windshield wiper blades of a Dacia Logan or Sandero
How to change the windshield wiper blades of a Dacia Logan or Sandero
Dacia Logan (2012-2022 / MK 2) .. how to change the windshield wipers of a Dacia Sandero or a Dacia Logan: It is advisable, before making the change, to measure the length of the wiper,.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos