Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to replace the horn lever on the Dacia Logan - Sandero

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Operation: How to replace the horn lever on the Dacia Logan - Sandero

Let's see in this short guide how to remove and replace the horn lever or the horn of the Dacia Logan, but also of the Sandero and the Duster. First we get on board the car and begin to remove the plastic bulkhead that we find around the steering wheel; then we use a T20 torx screwdriver to unscrew the screws of our lever, disconnecting the electrical connector to remove it, as shown in the video. At this point, we can repair or replace them directly; then we reassemble everything, applying the reverse procedure of disassembly!


Posted on 24 April 2024 by ScegliAuto



How to open the engine hood of the Dacia Logan
Dacia Logan (2004-2012 / MK 1) .. engine hood of the Dacia Logan, as well as the Sandero. First, we open the driver's side front door and start pulling the hood opening lever that we..
How to reset the Dacia Logan service warning light
Dacia Logan (2012-2022 / MK 2) .. oil change of the Dacia Logan, but also of the Sandero and the Duster. First of all we get on board the car and start turning on the instrument panel;..
Removal of the rear light Dacia Logan, Sandero
Dacia Logan (2012-2022 / MK 2) In this video tutorial we will see how to remove the rear light on a Dacia Logan, but also on other models of the manufacturer. First we open the boo

    Frequently Asked Questions

    • Logan 2012-2022 - How many liters of engine oil are required in a Dacia Logan? Read Answer
    • Logan 2012-2022 - Why does central locking not work in a Dacia Logan? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos