|
Do it yourself
| |||
| ||||
What to do if the cabin fan of the Dacia Sandero III is not working
Model: Dacia Sandero
MK 3
- Years 2021-2026
In this video we can see how to behave if the cabin fan of the Dacia Sandero does not work at any of the 4 speeds. First, disconnect the battery, then check the fuse in the box located in the cabin: it is the green 40 Amp fuse marked with F4; remove it with tweezers and check if it is burnt or oxidized. In this case, we can clean it with fine sandpaper, or replace it. If the fuse is intact, check the ground; the black cable connected to the body near the fan, under the dashboard: clean the contact well and screw it back on; then we can test the fan relay (marked with HVAC) by temporarily replacing it with an identical one (like the headlight relay) to test if it is faulty. Another check: the fan motor. Disconnect the fan connector, located behind the instrument panel, and measure the resistance between the pins with a multimeter; if it only works at speed 4, the fault could be the electrical resistance, so just replace the module located in the fan compartment.
Posted on 14 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Dacia Sandero
(2012-2020 /
B8)
Today, we will cover the main instructions for removing and replacing the cabin fan on the Dacia Sandero. First, open the front passenger door and be…
Dacia Sandero
(2012-2020 /
B8)
The fuse box in the engine compartment of the Dacia Sandero MK2 is located on the left side, near the battery. To access it, carefully remove the cov…
Dacia Sandero
(2012-2020 /
B8)
To locate the fuses inside the cabin of your second-generation Dacia Sandero, follow all the steps described in this guide. First, open the driver's …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.370
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |