Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box in the Engine Compartment of the Dacia Sandero MK2

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

The fuse box in the engine compartment of the Dacia Sandero MK2 is located on the left side, near the battery. To access it, carefully remove the cover: the plastic clips are fragile and easy to break.

If the cooling fan is not working, the problem could be a blown fuse, located in a specific position within the box. Unlike previous models, the Sandero MK2 does not use a relay for the fan: control is managed directly by the electronic modules, which read data from temperature sensors and flexibly activate or deactivate the fan. Check the diagram on the cover to identify the correct fuse and replace it with one of the same amperage.

Before proceeding, switch off the engine and disconnect the battery for safety.


Posted on 20 July 2026 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Boxes on the Dacia Sandero MK2
Location and Diagram of the Fuse Boxes on the Dacia Sandero MK2
Dacia Sandero (2012-2020 / B8) Let's see where the fuse boxes are located on the Dacia Sandero MK2: the first is found under the dashboard on the driver's side. Access this compart…
How do you open the fuse box of the Dacia Sandero?
How do you open the fuse box of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) The fuses of the Dacia Sandero are no different from those of other cars; they are all collected and installed in the fuse boxes, which are two and l…
Where is the Window Regulator Fuse on a Dacia Sandero?
Where is the Window Regulator Fuse on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) The fuse for the front window regulator of a Dacia Sandero mk2 is located inside the fuse box behind the left dashboard side panel. The fuse in quest…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos