Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Dacia Dokker?

Model: Dacia Dokker MK 1 - Years 2013-2024
Part:

To reset the tire pressure warning light of the Dacia Dokker, you will need to inflate the tires to the recommended pressure value: this value will be indicated on the sticker that is attached to the driver's door pillar. After inflating, you can turn on the instrument panel by inserting the ignition key into the corresponding slot: after turning on, you can repeatedly press the button on the end of the lever until the "Set tP" message appears. Once this is displayed, you can hold down the button for a few seconds to make the warning light disappear.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Dacia Dokker?
How do you reset the tire pressure warning light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) It will be possible to completely reset the tire pressure warning light of the Dacia Dokker by inflating the tires to the recommended pressure value:…
How to reset the tire warning light on the Dacia Dokker?
How to reset the tire warning light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In this tutorial, we can see how to reset the tire indicator in the Dacia Dokker, an extremely simple and quick operation, to be performed only after…
How to reset the Dacia Dokker tire warning light
How to reset the Dacia Dokker tire warning light
Dacia Dokker (2013-2024 / MK 1) To manually reset the tire warning light on your Dacia Dokker you do not need any professional diagnostic tool, in fact, you will only need to use a …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos