Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure indicator on the Dacia Duster 3

Model: Dacia Duster P1310 - Years 2024-2026
Part:

In this article, we show you how to reset the tire pressure warning light on the 3rd generation Dacia Duster. We recommend performing this procedure only if, after adjusting the tire pressure of your car and driving for a few meters, the system does not detect the new value. To reset this warning light, first turn on the instrument panel, then use the up arrow button on the right side of the steering wheel to navigate to the tire pressure menu. Once you have located the tire pressure, press and hold the up arrow button for a few seconds to start the reset. Wait for the confirmation message, then release the button and restart the instrument panel to verify that the procedure was successful.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Dacia Duster
How to reset the tire pressure sensor of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In a few simple steps, we will see how to reset the tire pressure warning light (TPMS) of the Dacia Duster; before performing the reset, it is necess…
Reset tire pressure warning for the Dacia Duster
Reset tire pressure warning for the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Today we will see the steps that will allow us to reset the tire pressure warning of the Dacia Duster; before performing the TPMS sensor reset, it is…
How to reset the tire pressure warning light of the Dacia Duster
How to reset the tire pressure warning light of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Today we will see the necessary instructions in order to reset the tire pressure warning light of the Dacia Duster. First of all, we get on board the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos