Do it yourself
Frequently asked questions about cars and motorcycles

What You Need to Know About LPG Phase Gas Filters

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air filter

See other generations:
Video tutorial

The gas phase filter, as seen on this Dacia Sandero, cleans the LPG before it reaches the injectors, trapping impurities and oily deposits that could clog and damage them. The filter should be replaced every 25,000/30,000 miles.

Upon opening, the old filter showed liquid deposits and impurities inside the casing, and the filter cartridge appears dark and clogged compared to the new one, which is clean yellow. The removed filter was an economical replacement, but it performed excellently for 25,000 miles.

For replacement, the YouTuber chose an original kit, which can be found on eBay with code 286090761092 for £20.00 with free delivery. Locate the filter near the air intake pipe, disconnect the small pipes and the gas inlet and outlet hoses; unscrew the support holding the filter in place, remove the old filter and replace it with the new one, ensuring the arrow directions are respected, reconnect the hoses, tighten the clips, and refit the support.


Posted on 15 March 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2021-2026 / MK 3) This video shows how to change the LPG filter (gas phase) on a Dacia Sandero MK3, which was replaced at 18,640 miles, as recommended by the manufactu…
Dacia Sandero (2012-2020 / B8) Stay calm because to replace the LPG liquid phase filter, it is necessary to follow some precautions and steps, but nothing that cannot be dealt with…
Dacia Sandero (2021-2026 / MK 3) In this video, we focus on a filter related to vehicles with a mixed gasoline/LPG fuel system. It is a filter that even mechanics think they never ha…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos