|
Do it yourself
| |||
| ||||
How to change the liquid phase filter on LPG vehicles
Model: Dacia Sandero
MK 3
- Years 2021-2026
In this video, we focus on a filter related to vehicles with a mixed gasoline/LPG fuel system. It is a filter that even mechanics think they never have to change, when instead it is the first filter located in the solenoid valve, and it is the liquid phase filter of the LPG: in the case of the Sandero in the video, it is located on the driver's side, so we will need to remove the left wheel. The YouTuber describes in detail the path of the LPG as it transitions from liquid to gas, enters the injectors, and then goes to the engine. Upstream of the solenoid valve, we find the liquid phase filter. Therefore, we need to disassemble the solenoid valve because the filter is inside it. Before performing this operation, it is advisable to close the LPG cylinder. We remove the three screws that secure the solenoid valve, take off the cover, and we find the filter, of which we still have a piece + the gasket inside the solenoid valve. He also shows us the amount of dirt inside the filter; we can find the replacement, for example, on E-Bay with code 196668710227 for the price of 14.99 euros with free shipping. Reassembling it is very simple: we place the gasket, then the filter with its cover, the gasket of the solenoid valve, and close the three screws. We can reattach the wheel arch and wheel.
Posted on 13 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Sandero
(2012-2020 /
B8)
Stay calm because to replace the LPG liquid phase filter, it is necessary to follow some precautions and steps, but nothing that cannot be dealt with…
Dacia Sandero
(2021-2026 /
MK 3)
This video shows how to change the LPG filter (gas phase) on a Dacia Sandero MK3, which was replaced at 18,640 miles, as recommended by the manufactu…
Dacia Sandero
(2012-2020 /
B8)
The gas phase filter, as seen on this Dacia Sandero, cleans the LPG before it reaches the injectors, trapping impurities and oily deposits that could…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.100
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |