Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the LPG liquid phase filter in a Dacia Sandero II TCe 90 LPG?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Diesel fuel filter

Stay calm because to replace the LPG liquid phase filter, it is necessary to follow some precautions and steps, but nothing that cannot be dealt with with a little patience. Turn off the engine and disconnect the battery for safety reasons. Then locate the LPG filter, which is located along the liquid gas supply pipe generally near the tank. Loosen the clamps securing the filter connecting pipe. Remove the used filter and replace it with a new one, making sure it is compatible with your car's LPG system. Reassemble the pipes and clamps, tightening them securely. Check for any leaks and reconnect the battery. Finally, check the proper functioning of the LPG system by starting the engine. If you do not feel comfortable making these changes on your own, contact a workshop directly.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the liquid phase filter on LPG vehicles
How to change the liquid phase filter on LPG vehicles
Dacia Sandero (2021-2026 / MK 3) In this video, we focus on a filter related to vehicles with a mixed gasoline/LPG fuel system. It is a filter that even mechanics think they never ha…
Replacing the LPG Filter on a Dacia Sandero MK3
Replacing the LPG Filter on a Dacia Sandero MK3
Dacia Sandero (2021-2026 / MK 3) This video shows how to change the LPG filter (gas phase) on a Dacia Sandero MK3, which was replaced at 18,640 miles, as recommended by the manufactu…
What You Need to Know About LPG Phase Gas Filters
What You Need to Know About LPG Phase Gas Filters
Dacia Sandero (2012-2020 / B8) The gas phase filter, as seen on this Dacia Sandero, cleans the LPG before it reaches the injectors, trapping impurities and oily deposits that could…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos