Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Tail light bulb

How do you replace the bulbs in the rear light of a Dacia Sandero? This is a very simple operation; let's see how to proceed. Open the boot lid, then remove the fabric cover located on the side trim of the boot. Unscrew the plastic-headed pins of the rear light, disconnect the power connectors attached to the light and pull it out from its housing. Replace the damaged bulbs with new ones (same voltage) at hand. Refit the light with the respective fastening pins, reattach the inspection cover, and finally test the lights for proper operation.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Dacia Sandero
How to Replace the Front Headlamp Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Open the bonnet by pulling the lever located at the bottom left of the dashboard, and secure it with the prop rod. Locate the inspection cap of the h…
Replacing Front Bulbs on Dacia Sandero
Replacing Front Bulbs on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Are the front headlamp bulbs on your Dacia Logan blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the d…
Removing the Front Headlamp Bulbs on a Dacia Sandero
Removing the Front Headlamp Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Learn how to remove the bulbs fitted in the front headlamp on a Dacia Sandero. Open the bonnet by pulling the lever located at the bottom right of th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos