Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dacia Duster Fuses

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

How to replace damaged fuses in your Duster? Open the door and unlock the front bonnet. Open the engine bay, and use a plastic lever to remove the cover in the engine compartment.

Use pliers to disconnect the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment.

Close the fuse inspection box with the plastic cover and screw it in place. Close the front bonnet of the Dacia Duster.

Start the vehicle and test the operation of the electrical components.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Where is the OBD port located on the Dacia Duster?
Where is the OBD port located on the Dacia Duster?
Dacia Duster (2010-2017 / MK 1, HS) To easily locate the OBD port inside your Dacia Duster first edition, simply follow the procedure described below. First, enter the car and reach the…
How to Reset the "Service" Light on a Dacia Duster
How to Reset the "Service" Light on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before you can start, sit in the driver's seat of your Dacia Duster. Begin by activating the instrument cluster by simply turning the key in the igni…
How to Reset the "Tyre Pressure" Light on a Dacia Duster
How to Reset the "Tyre Pressure" Light on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before starting, sit in the driver's seat of your Dacia Duster. Start the engine by turning the key in the ignition switch. Then, select the "Set tp"…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos