Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Duster
  6. : Removing the wiper blades on Dacia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Windscreen wipers
Operation: Removing the wiper blades on Dacia Duster

Do we want to replace the wiper blades of our car? Let's see how the brushes of the Dacia Duster are removed. We take the front brush (to be replaced) with our hands, pull the movable brush as in the video and slide it off the arm. We mount the new blade (if the brush is not original we have to remove the plastic piece), lower the wiper arm onto the windshield and carry out the same operation on the second blade. It is always preferable to mount original parts for a longer duration and superior quality. We turn on the instrument panel and test the operation of the new brushes.


Posted on 24 January 2024 by ScegliAuto



Replacement windshield wipers Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) In this video we see how to replace the front and rear wiper blades of the Dacia Duster first series. The dimensions of the brushes are 50 cm on the
How to replace the front wiper blade on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before we can start, we will have to get out of the cockpit of our Dacia Duster, and head towards the front of the car. So let's start by raising the
How to replace the windshield wiper pump of the Dacia Duster.
Dacia Duster (2017-2024 / HM, MK 2) In this video, we see how to replace the windshield wiper pump of the Dacia Duster. The pump is located on the side of the water tank. First, we need

    Frequently Asked Questions

    • Duster 2017-2024 - Where is the washer fluid reservoir located in Dacia Duster? Read Answer
    • Duster 2017-2024 - Where should the water for the windshield wipers be poured in the Dacia Duster? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos