Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Windshield wipers

In this video, we will see how to replace the front and rear wiper blades on the first series Dacia Duster. The sizes of the blades are 50 cm for the driver's side, 45 cm for the passenger side, and 30 cm for the rear window. As with many other cars, replacing the wipers is very simple. Start with the front wipers by lifting them and removing them from the original mount, then replace them with the new ones. Follow the same procedure for the rear wiper; remove it from the mount, taking care to detach it without breaking the plastic pin, and replace it with the new one.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wiper Blade on a Dacia Duster
How to Replace the Front Wiper Blade on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before you can start, exit the cabin of your Dacia Duster and head to the front of the vehicle. Begin by lifting the entire wiper arm, along with the…
Removing Wiper Blades on Dacia Duster
Removing Wiper Blades on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Want to replace the wiper blades on your car? Let's see how to remove the blades from the Dacia Duster. Take the front wiper blade (to be replaced) w…
How to Reset the Tyre Pressure Light on the Dacia Duster
How to Reset the Tyre Pressure Light on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) To reset the tyre pressure light on a Dacia Duster, use the button at the end of the wiper control stalk: turn on the ignition and the car, press the…

    Frequently Asked Questions

    • Duster 2017-2024 - Where is the washer fluid reservoir located in Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos