Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Blade on a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Windshield wipers

Before you can start, exit the cabin of your Dacia Duster and head to the front of the vehicle. Begin by lifting the entire wiper arm, along with the blade that needs replacing. Next, position the blade perpendicular to the support arm. Once done, unclip the fastening clip, then remove the blade itself, completing the disassembly. To fit the new blade, simply reverse this procedure, and you will have finished the replacement.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Wiper Blades on Dacia Duster
Removing Wiper Blades on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Want to replace the wiper blades on your car? Let's see how to remove the blades from the Dacia Duster. Take the front wiper blade (to be replaced) w…
How to replace the windscreen wiper pump on the Dacia Duster
How to replace the windscreen wiper pump on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In this video, we will see how to replace the windscreen wiper pump on the Dacia Duster. The pump is located on the side of the water reservoir. Firs…
How to replace the horn of the Renault Duster - Dacia Duster
How to replace the horn of the Renault Duster - Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Today's main instructions will show us the process of disassembling and replacing the horn or acoustic warning device of the Renault Duster, as well …

    Frequently Asked Questions

    • Duster 2017-2024 - Where is the washer fluid reservoir located in Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos