Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on the Dacia Sandero 2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tail light bulb

In today's video tutorial, you will see step-by-step instructions for removing and replacing the rear light bulbs on the second series Dacia Sandero. First, open the boot lid and start by removing the light block located at the back; then disconnect the electrical connector of the bulbs and remove the lens from the light to access it, as shown in the video. At this point, press and twist the bulb to remove it from the holder and replace it with the new one, applying the reverse procedure for reassembly!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp on a Dacia Sandero
How to Replace the Rear Headlamp on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to remove the damaged headlamp on a Dacia Sandero? Follow these steps to take apart the rear headlamp and change it. Lift the boot lid, and remov…
How to Replace the Rear Light Bulbs on the Dacia Sandero
How to Replace the Rear Light Bulbs on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today, you will learn how to replace the rear light bulbs on the Dacia Sandero model 2. To replace the bulbs, open the boot and remove the plastic co…
How to Replace the Rear Light Bulbs on a Dacia Sandero?
How to Replace the Rear Light Bulbs on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To replace the rear light bulbs on a Dacia Sandero, first lift the boot lid. This is necessary because inside the boot, corresponding to the relevant…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos